H & R Alarms can provide you with a structured Networking System to integrate networking, phones, audio, and video. We use Open House systems to offer you the state of the art technology in a networking system. Open house gives you the ability to have one or all of the features you want.
12" ENCLOSURE
The Model H312KIT 12" Plastic Enclosure, Includes Cover provides grid mounting space for OpenHouse, ChannelPlus, and M&S Systems structured wiring components. The enclosure is ETL Listed and features 19 grid inches of mounting capacity in two 9-1/2" columns. Structured wiring modules snap securely into the enclosure's mounting grid. Recommended enclosure for the M&S Systems DMC-10 Structured Wire Intercom Hub.
The enclosure mounts in the wall between standard 16-inch spaced studs, or it can be surface mounted. The flexi-mount system features four flexible mounting tabs on the sides of the enclosure. The flexi-mount tabs compensate for varying stud spacing and allow for adjusting the depth of the cabinet for flush-mounting with all thicknesses of drywall.
A snap-on cover that can be screwed shut is supplied with the enclosure. The vented cover has a raised interior, allowing for easy wiring and better component cooling.
Eight combination conduit knockouts (four along the top, two on the bottom, and one on each side) that fit either 2" or 1/2" conduit fittings are provided. The enclosure has an additional knockout on the bottom to mount a single-gang junction box for AC outlet installation.
Features:
- 12 inches high
- 19 grid inches (2-9.5 inch columns)
- Fits between studs
- ABS construction
- Flexi-mount system (slots and tabs allow for surface or flush mount)
- Electrical J-box knockout on bottom
- Eight combination 1/2" or 2" knockouts including two located on the sides of the box
- Paint shield and four Philips head screws included
- Snap-on vented cover included
- ETL Listed
The Model H318 18" Enclosure provides grid mounting space for OpenHouse, ChannelPlus, and M&S Systems structured wiring components.
Features:
• HC18A: Optional Enclosure Cover (not shown)
• 18 inches high
• 33 grid inches (2-16.5 inch columns)
• Fits between studs
• 16 gauge all metal construction
• Flexi-mount system (slots and tabs allow for surface or flush mount)
• New electrical knockout in bottom
• Eight knockouts including two located on the side of the box
• Accepts H290 or H291 power accessory
• Optional H208 lock available
The Model H336 36" Enclosure provides grid mounting space for OpenHouse, ChannelPlus, and M&S Systems structured wiring components.
Features:
- HC36A: Optional Enclosure Cover (not shown)
- 36 inches high
- 69 grid inches (2-34.5 inch columns)
- Fits between studs
- 16 gauge all metal construction
- Flexi-mount system (slots and tabs allow for surface or flush mount)
- New electrical knockout in bottom
- Eight knockouts including two located on the side of the box
- Accepts H290 or H291 power accessory
- Optional H208 lock available
The Model H628 Data Termination Hub terminates up to eight Cat-5 data lines. The hub features eight RJ-45 jacks and eight 110 punch-down connectors. Each RJ-45 jack connects directly to its associated 110 punch-down connector. This will allow easy termination into your router or switch.
Features:
• Certified 100 Base-T performance
• Cat-5e performance in a multi-port hub
• Terminates 8 Cat-5e cables
• 110 punch-down connectors
• Circuits may be bridged
The Model H616 Telephone Master Hub provides a superior method of telephone distribution for structured wiring systems. The Model H616 distributes up to four telephone lines to up to six telephone wall plates. An RJ-31X jack is provided for security system connection. Additionally, the Model H616 includes an RJ-45 jack for telephone line expansion. If more than six telephone wall plates are needed, the H618 Expansion Hub can distribute up to four telephone lines to up to eight additional telephone wall plates. If more than fourteen wall plates are need you may add additional H618 Expansion Hubs at 8 wall plates a piece.
Features
• Telephone service for four lines with outputs to six separate locations
• RJ-31X for seizure of line one
• 110 punch-down connectors
• RJ-45 expansion jack
• Six enclosure grid spaces
• 6.25" x 1" x 2.75"
The Model H838BID Bi-directional Video Hub with 5-volt IR (for use with cable TV feeds) amplifies the incoming signal and provide outputs to eight television locations in the home. In addition, each has two modulator inputs to add locally generated channels from DVD players, satellite receivers, VCRs, digital cable boxes and front door, back door and babies room cameras. Every TV location in the home receives every cable or antenna channel plus every modulator generated video channel. In addition the Model H838BID has a built-in IR engine which allows infrared remote control of the video equipment from any TV location.
The Model H838BID has a return path for bi-directional CATV, perfect for use with cable modems and pay-per-view boxes.
Features:
- Distributes CATV to eight TVs
- Two modulator inputs to add locally generated channels (camera or DVD)
- Bi-directional with a 5-42 MHz return path for cable modems, interactive applications and pay-per-view boxes
- IR repeating system using 5-volt targets
- Five enclosure grid spaces